DC SD45A D Standard Dishwasher with Break Tank & Drain Pump 450mm Basket
DC SD45A D Standard Dishwasher with Break Tank & Drain Pump 450mm Basket is part of the DC range of frontloading warewashers combining speed, strength and reliability with intense cleaning ability and an easy to use control panel. This model is constructed using a double-skinned stainless steel cabinet and door to improve strength, thermal acoustic insulation and reduce running costs. The complete Standard range comes supplied with rinse and detergent dosing units and can be fitted with integral water softeners to help protect the machine and improve results.
This dishwasher has a break tank which is required for high-risk areas such as Schools, Care Homes, Nurseries or Hospitals where contamination of the water supply would be detrimental to hygiene and health.
Product Features:
- Heavy duty wash pump
- Removable anti-block wash and rinse arms
- Hydro dynamic basket slides
- Low water usage
- Easy Clean filters
- Optional thermostat for guaranteed rinse temperatures
- Self draining wash pump for improved hygiene
- Integral detergent and rinse aid dosing units
- Simple, intuitive controls
Technical Specifications — SD45
- Cycle time: 180 sec
- Baskets: 450 × 450 mm (x3)
- Height: 795 mm
- Width: 535 mm
- Depth: 575 mm
- Depth with door open: 930 mm
- Usable wash height: 290 mm
- Drain height: 180 mm
- Drain Ø: 25 mm
- Wash tank: 22 litres
- Boiler: 2.8 litres
- Water usage: 2.4 litres per cycle
- Wash element: 2 kW
- Boiler element: 2.6 kW
- Total load: 3 kW
Installation & Site Requirements
- Water Softener: Required if water supply exceeds 100 ppm.
- Drain Pump: Required if waste services are higher than the drain outlet.
- Break Tank: Required in high-risk sites (schools, care homes, nurseries, hospitals) to protect the mains water supply.
Electrical appliances MUST be installed by a qualified electrician. Incorrect compliance to current installation legislation will invalidate the warranty.
For full technical and installation requirements, please refer to the manufacturer’s specification sheet (attached).
